Rochester Industrial Services, Inc is an independent repair facility not affiliated with any of the manufacturers listed on our website.

Sonics 101

How Ship-In Ultrasonic Welder Repair Works: From Packing to Return

When an ultrasonic welder goes down, your line goes down with it. But you don't need a technician on site to get it fixed. Almost any piece of ultrasonic equipment, from a single converter to a complete system, can be shipped in, repaired and sent back by our ultrasonic welder repair team. We repair all makes and frequencies, including Branson, Dukane, Herrmann, Telsonic, Sonics & Materials and imported equipment.

Here's how it works at Rochester Industrial Services, and how to pack your equipment so it arrives safely.

Ultrasonic welder ready to be shipped in for repair

1. Fill Out the Ship It Now Form

Start with the Ship It Now form on our website. No RMA number is needed. Tell us the manufacturer, model and serial number, and describe the failure. Error codes, when the problem happens and whether it started after a crash or tooling change all help us diagnose it faster. You can also upload photos and request expedited service.

2. Decide What to Send

If you know the problem is in one component, like the power supply, send just that part. If the problem is intermittent or you aren't sure where it is, send the complete system (power supply, converter, booster, horn and actuator) so we can test everything together under load. Not sure? Call us at 1.888.349.4638.

3. Prepare the Equipment

  • Turn the welder off and disconnect power and air.
  • Let the stack cool before handling it.
  • If you must separate the horn, booster and converter, make sure to use the proper spanner wrenches and protect the horn surface. If a joint is seized, don't force it. Ship the stack assembled and note it on the form.

4. Pack It Right

Most shipping damage happens when a heavy part shifts in the box or a fragile surface takes a hit.

  • Use the original packaging if you have it.
  • No original box? Wrap each component separately in about 2 to 3 inches of bubble wrap or foam, then use the box-in-box method: a sturdy inner box set inside a larger outer box with about 2 to 3 inches of filler on every side.
  • Protect the horn face and cover the threaded studs. Keep stack parts from touching each other.
  • Put loose circuit boards in anti-static bags.
  • Fill every empty space so nothing shifts, and tape all seams.
  • Parcel carriers cap packages at 150 pounds, so some actuators and complete systems should be strapped to a pallet and shipped by freight.

5. Add Your Paperwork and Ship

Put a copy of your PO or any other paperwork inside the box or in a packing slip pouch on the outside. Insure the shipment and ship to:

Rochester Industrial Services, Inc.
291 Millstead Way
Rochester, NY 14624

6. Free Evaluation and Same-Day Quote

When your equipment arrives, we evaluate it free of charge and, in most cases, quote the repair the same day. Repairs begin once you approve the quote.

7. Repair, Testing and Return

Our technicians repair your unit at the component level, then run it through burn-in cycling, load testing and output verification against the original manufacturer's specifications. Standard turnaround is 2 weeks, and expedited repairs for line-down emergencies are available. Every repair ships back with our 1-year warranty and free telephone tech support.

Tip: Save the box it comes back in. Your next shipment will be even easier.

Ready to ship? Fill out the Ship It Now form or call 1.888.349.4638 with any questions or concerns.

Ship It Now

Ship-In Repair FAQ

Do I need an RMA number?

No. Simply fill out and submit the Ship It Now form.

How much does an evaluation cost?

Evaluation is free.

How long does ultrasonic welder repair take?

Standard turnaround is 2 weeks. Expedited repairs for line-down emergencies are available.

Is there a warranty?

Yes. Every repair includes a 1-year warranty and free telephone tech support.

Rochester Industrial Services is an independent repair facility and is not affiliated with, authorized by or endorsed by Branson, Emerson, Dukane or any other equipment manufacturer named in this article. Manufacturer names are used only to identify the equipment we service.

Exceptional Repairs

of Industrial Equipment and Component Level Services.

At Rochester Industrial Services, we’re proud to specialize in the repair of all domestic and foreign makes and models of industrial electronic equipment. From power supplies, drives and video display equipment, to ultrasonic, HMI and automation equipment, there’s nothing too simple or complex for our team of expert industrial service techs.

Got a Question?

Call: 1.888.349.4638